Job Description Summary

Job Description

Non-Destructive Technician Level II

About GE Aerospace: 

Are you ready to see your future take flight? At GE Aerospace, we are advancing aviation technologies for today and tomorrow. Your work will contribute to the production of advanced jet engines, components, and integrated systems that power commercial and military aircraft. You’ll be part of a team that embraces your drive, your curiosity, and your unique ideas and perspectives.  Most importantly, you’ll share in our pride and purpose that affects the lives of millions around the world! 

Working at our Dayton site:

TDI has been leading design and manufacturer of turbine powered start systems for 40+ years and designer of turbine air motors for over 60 years. The TDI site in Dayton, OH is a part of Unison, a GE Aerospace Company. Unison is uniquely positioned to introduce the next-gen Air Turbine Starter for the CMF56-7B fleet. At the TDI site, Unison also produces Surface Coolers and Bellows to support the aerospace industry.

Role Overview:

• Follow routers, procedures, specifications, and any other NDT related instructions that are necessary to perform FPI.
• Perform all required process control checks on NDE equipment by following established specifications, work instructions and then recording the results in the process control log
• Perform penetrant inspections using approved procedures and/or written techniques
• Keep the equipment clean and ensure that it is working properly
• Maintain a safe and clean work area
• Maintain (keep current) their required NDT certifications, workmanship, and annual personnel auditing schedules
• Stay current and up to date with procedures, specifications, and NDT related required training

• Produces error free products and accurately completes paperwork
• History of working effectively with co-workers, managers, and other employees in a team environment
• Willing to cross train in other NDT methods
• As needed, available to work extended or flexible schedule on short notice

• Able to work under general direction with minimal supervision

The Ideal Candidate:

In this role the ideal candidate will primarily perform fluorescent penetrant inspections of weldments and tubing, castings, etc. in accordance with company/customer drawings and specifications.

Required Qualifications:

• High School Graduate
• Must pass near vision exam achieving at least Jaeger 1 at 12”
• NDT Level 2 FPI Certification in accordance with NAS-410
  • Minimum 400 hours of FPI work experience (must be documented or evidence of prior certification from previous employer)
  • Minimum 32 hours of documented formal NDT training (syllabus or training certificate)

Preferred Qualifications:

• Two years of aerospace manufacturing experience using non-destructive testing methods
• Able to utilize measuring devices including comparators, micrometers, scales, and calipers
• Blueprint Reading
• Problem Solving (7 step or 6 sigma)
• Thorough knowledge of the NDE method they will be primarily working in
• Manufacturing processes (i.e. Brazing, Welding & Casting) and defects associated with these processes as they relate to NDT
• Understanding of written instructions, procedures, and specifications related to the applicable NDT process(es)
• Defect Data Collection System
• NDT Data input (AS400)
• Knowledge of Operating NDT equipment
• Intermediate MS Word, Excel, Powerpoint and Access skills

Additional Information:

• Starting pay $29.85
• Able to lift up to approximately 25 pounds.  May occasionally lift 50 pounds (with assistance)
• Able to work in an area where there is moderate noise intensity (85 to 89.9 dBa)

• Able to work in an area where, due to normal machining operations there may be dust, fumes, or smoke (not over OSHA Permissible Exposure Levels (PEL))

Closing: 

At GE Aerospace, we have a relentless dedication to the future of safe and more sustainable flight and believe in our talented people to make it happen. Here, you will have the opportunity to work on really cool things with really smart and collaborative people. Together, we will mobilize a new era of growth in aerospace and defense. Where others stop, we accelerate. 

This role requires access to U.S. export-controlled information. Therefore, for applicants who are not U.S. lawful permanent residents, U.S. Citizens, or have been granted asylee or refugee status (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), employment will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.

Additional Information